Kromex® technology enables the shaping of logos, badges, emblems and any of the signs that identify your product.

Tooling costs are lower, comparing to other chrome technologies, as, for example, injection molding.

Technical specifications

  • Can be made in thicknesses up to 12 mm (standard 6 mm)

  • Featuring curved surfaces and/or sharp edges, in order to achieve even the most complex geometrical shapes

  • Screen printed graphics or resin doming may add a special value to basic chrome effect

  • To be used on plain or slightly curved surfaces

  • Fits for outdoor use

Standard finishing

  • Polished, matt, brushed chrome

  • Polished, matt, brushed aluminium

  • Screen printed colours: gold, yellow, orange, red, green, violet, blue, black

AUTOMOTIVE TESTS

TEST  REF. METHOD TEST CONDITIONS RESULTS
Heat Resistance  MS-CG12 250 h. at 80°C no gloss change
no delamination
Humidity Resistance  MS-CG12 250 h. at 40°C 100% R.H. no gloss change
no delamination
Salt Spray resistance  ASTM B117-95  200 h 38° C 5% NaCl no gloss change
no delamination
Thermal Cycles  TSM 7508G 2 h@-30°, 0,5 h @100°, 5 cycles no gloss change
no delamination
 Acid resistance  MS-CG12 Spot Test 0,5-10% conc. no gloss change
no delamination
Xenon WOM SAE j1960-89 (2000 h) UV < 380 nm
Irradiance 50 W/m²		 no color change
minimal gloss change
Weathrometer QUV-A SAE J 2020 1600 hh (8hUV 70° – 4hcond.50°C) no color change
minimal gloss change

GALLERY

Products